Understanding the Commercial Patching Job Process

Patching is a necessary process in maintaining and repairing the roads and parking lots. It involves the removal of damaged or deteriorated surfaces and the placement of new asphalt or concrete to restore the integrity of the pavement. In commercial settings like parking lots or busy streets, the patching process needs to be done efficiently and quickly to minimize disruptions to daily operations. In this blog, we will take a closer look at how commercial patching jobs work and what you can expect from the process.

 

1. Site Evaluation

Before starting the patching work, a site evaluation is done to assess the extent of the damage and determine the appropriate repair method. The evaluation may include measurements of the area to be patched, evaluations of the drainage systems, and inspections of the sub-base to ensure its stability. A final report is then made, outlining the scope of work, the materials required, and the estimated cost.

2. Preparation

Once the report is approved, the preparation process begins. Any required excavation is performed, and the damaged surfaces are removed. Any debris or dirt is cleared away from the work area, and the edges of the patch are cut and smoothed. An adhesive is applied to the edges of the patch to ensure a good seal.

3. Placement

Once the preparation is complete, the new patch material is put in place. The material may be either asphalt or concrete depending on the specific requirements of the job. The patch needs to be compacted and smoothed to ensure that it adheres correctly to the existing surface. This may be done using a roller, hand tamper, or a vibratory plate compactor.

4. Finishing

Once the patch has been placed and compacted, any excess material is removed from around the edges. A final smooth surface is created, and any necessary markings, such as stripes or arrows, are painted onto the surface. The site is then cleared of any debris, and the patch is allowed to cure for several days before the area is opened for use.

5. Quality Control

After the patch has been completed, a final quality check is performed. This may involve inspections of the surface to ensure that it is smooth and even, and that there are no cracks or depressions. Any necessary touch-ups are made before the work is declared complete.

 

Conclusion

When it comes to commercial patching jobs, it is essential to work with experienced, professional contractors to ensure the work is done correctly and efficiently. At C. Brooks Paving, we have years of experience in providing quality patching services to our customers. Contact us today for a free estimate on your next patching project in Kerrville TX.